Riders on an Aventon Pace, an NCM or a Pedego Element share one battery format: the Reention Dorado, a downtube pack that slides onto a keyed base plate.

The ShunTongDa 17.5Ah targeted that exact crowd with 840 watt-hours, more tank than the 10Ah and 13Ah packs those bikes usually ship with, sold for 286. The listing is gone now. Amazon returns page-not-found for it, and it never drew a written review, so there's no owner record behind anything it claimed.

That makes this a fitment article more than a road-test article, which suits the format anyway, because a Dorado swap is decided by tape and pin counts long before price enters it. Below is what the recorded listing claimed, what the math supports, and the checks that decide whether any Dorado pack will actually drop onto your frame.

The honest verdict up front: the fitment claims were plausible but skin-deep, the price was high for the energy, and the one part of the spec sheet that could be checked on paper, the charger, closed cleanly. The pack stated a 30A BMS and a 54.6V charger. Thirty amps at 48 volts is 1,440 watts of continuous output, well above the 1000W motor ceiling the listing named. And 54.6 volts is precisely what a thirteen-series 48V pack should charge at. Those are the two checks a spec-only listing has to pass, and it passed both. Everything about how the pack actually behaved stayed unverified from the day it listed to the day it vanished.

ShunTongDa 48V 17.5Ah Reention Dorado pack with its mounting plate and keys

A Dorado swap is decided by the case, not the brand list

The compatibility list covered Aventon Pace 350 and 500 1.0, NCM, Magnum i6, Pedego Element, Shengmilo MX03 and GIO, a broad list for one housing. The recorded size was 458 by 106 by 65 mm, the standard Dorado length.

But brand lists on battery listings describe the look, and the look is the weakest kind of fitment proof.

Two checks decide a swap. The first is case length: Dorado cases come in a long version at 500 mm and a short one at 475, total length, and Biktrix's Dorado mount plate page sells separate plates to match each, which tells you the format has real variants rather than one universal footprint.

The second is the discharge connector: a buyer question on that same page notes one aftermarket plate shipping a two-pin connector against six-pin Dorado batteries, so pin counts vary across the format and the plug has to match what your controller wiring expects.

Our own shelf backs the caution up. The ShunTongDa 52V 17.5Ah sibling listed dimensions that contradicted its own spec rows, and the model numbers on that listing matched nothing the bullets described. Treat a brand list as a starting point, then measure your existing pack and base before ordering anything.

The price, and what the ladder was selling

Two hundred eighty-six for 840 watt-hours works out to about 34 cents per watt-hour, which put this pack in the pricier third of everything we track on the comparison table.

Cheaper 48V downtube packs sold for roughly half that per watt-hour, though usually in the Hailong case style rather than a Dorado fit. The price premium here bought the housing, not the energy. Say it plainly: you paid for the form factor.

The listing also sold this same housing in a size ladder from 13Ah up to 30Ah. The title managed to name two rungs at once, the 17.5Ah in the slug and a 20Ah in the title. That's variant-ladder marketing, one listing collecting searches for several products, and it means any spec you read had to be tied to a rung before you trusted it.

The math the listing did state

The 30A BMS against a 250W to 1000W motor range leaves honest headroom, 1,440 watts of continuous output against a 1000W ceiling. The BMS wouldn't be the limiting part on any motor the listing claimed.

The safety list was the standard four, overcharge, overdischarge, overcurrent and short circuit. The housing was aluminum alloy. That adds a little weight over plastic, and it helps the case survive the slide-on mounting Dorado packs live with.

The charge-time floor

The charger shipped at 54.6V, in a 2A or 3A version depending on which rung shipped. The voltage closes on the thirteen-series math again, thirteen cell groups times 4.2 volts. On time, seventeen and a half amp-hours divided by 2 amps is close to a nine-hour floor from empty, and the 3A version brings that under six.

The listing also stated a 0 to 45 degree charging window and a discharge window down to minus 20, so cold-weather riding sat inside the rated spec even though charging a cold pack does not.

the Dorado pack's fitment chart from the recorded listing

Range, scaled from the anchor

the Dorado pack's mounting plate and lock from the recorded listing

No owner ever measured this pack, so the fairest range figure is scaled math, labeled as such.

The em3ev range guide states 30 to 40 miles on the throttle for a full 20 amp-hour tank, and 50 to 65 miles on low pedal assist. This pack held seven-eighths of that energy, so the scaled figures land at roughly 26 to 35 miles on the throttle and 44 to 57 with modest pedaling.

Your weight, your hills and your throttle hand move those numbers, and the old write-up's 30-to-50 claim for a 500W motor sat inside the same band once you scale it honestly. I'd plan rides on the low half of those bands until a pack is actually metered.

What the record never settled

The listing displayed a default five-star rating with no written reviews behind it when we covered it in February 2026, and no review ever arrived. Our recorded data carries a 4.5 rating with no count attached. The dead page can't settle which, if either, was real, so treat the rating as unproven.

Nobody metered the pack, so the 17.5Ah label rests on the seller's word, as it does for every pack in this tier. The weight was never printed. The warranty was a one-month return window plus twelve months of free repair, with a 24-hour response claim, and the shipping note said US warehouse or China depending on stock, which predicts delivery-time lottery more than build.

I can't tell you how this pack rode, because nobody ever said, and that's the honest limit of a record with no reviews in it.

Matching a Dorado pack to your frame

The xiseny swap guide covers this from the folding-bike side, and the Dorado version of the same discipline looks like this. Measure your existing case's length and compare it against the long and short Dorado variants, since a plate built for one won't accept the other. Count the discharge pins on both the pack and the base, because the format doesn't standardize them.

Confirm the charger is 54.6V, never higher, before you plug anything in. Then check the warranty terms in writing, because the twelve-month free-repair promise on this listing died with the seller, and any new pack is only as good as the seller standing behind it. The folding DCH-009 sibling from the same brand holds the same 840Wh in a built-in case, if your bike takes that mount instead.

Frequently Asked Questions

Which bikes was it listed as compatible with? Aventon Pace 350 and 500 1.0, NCM, Magnum i6, Pedego Element, Shengmilo MX03 and GIO, per the recorded listing. The list describes appearance, so measure your case and base before trusting it for your exact model.

Was the price good? No. At about 34 cents per watt-hour it sat in the pricier third of the packs we track. The premium bought the Dorado housing and the larger-than-stock tank, not cheap energy.

How long did a charge take? Close to nine hours from empty on the 2A charger version, under six on the 3A version, both from a 54.6V charger that matches the pack's thirteen-series layout.

Did it have reviews? No written reviews ever appeared. The listing showed a default five-star display early on, and the rating our data carries can't be verified against the dead page.

What motors could it run? The listing claimed 250W to 1000W. The stated 30A BMS works out to 1,440 watts of continuous output at 48 volts, so the motor ceiling sat well inside the discharge headroom.

Is a Dorado pack interchangeable across brands? Only once the case length and the discharge pin count match. The format has at least two case lengths, and aftermarket listings show connector pin counts varying, so the swap is a tape-and-pins job, not a brand-list job.

See every pack we track, sorted by price per watt-hour, on the comparison table.

Check current prices on Amazon